Error Code DC
The door was opened while the dishwasher was running its installation test
Minor
Usually easy to fix - may resolve on its own
Also displayed as: DC
What This Means
Door is opened during Smart Install mode; Door latch is out of order
What actually causes this:
Someone opened the door during the setup test process
First Thing to Check
Close the door firmly and press Start to restart the test
Parts Involved
How to Fix
- 1
1. Close the door firmly
- 2
2. Check door latch operation — ensure it latches properly
- 3
3. If latch is defective, replace door latch
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for DW80B6061US
The dishwasher is not getting enough water to run
The dishwasher cannot pump the dirty water out
The heating element is not warming the water properly
The water inside the dishwasher got dangerously hot
The hot air drying system is not heating up properly
The hot air drying system got dangerously overheated
The water temperature sensor is not reading correctly
The temperature sensor in the drying system is not reading correctly