Error Code bC2
A control panel button appears to be stuck or held down
Minor
Usually easy to fix - may resolve on its own
Also displayed as: No display
What This Means
Touch button is out of order; An object is resting on the touch button; Condensation on PBA connector
What actually causes this:
Moisture from steam got into the control panel, making it think a button is being pressed, or something is resting on the buttons
First Thing to Check
Check that nothing is leaning against the control panel and wipe it dry — steam moisture is a common cause
Parts Involved
How to Fix
- 1
1. Check whether there is condensation on the PBA — CN103 of Display Control Module connector
- 2
2. Check CON100 TOUCH Module connector (Display Control Module, Touch Module, Sub Wire) — Normal: no condensation
- 3
3. If condensation found, remove all moisture and dry thoroughly
- 4
4. If no condensation, replace the Control Panel Assembly
Other Error Codes for DW80B7070UG
The dishwasher is not getting enough water to run
The dishwasher cannot pump the dirty water out
The heating element is not warming the water properly
The water inside the dishwasher got dangerously hot
The hot air drying system is not heating up properly
The hot air drying system got dangerously overheated
The water temperature sensor is not reading correctly
The temperature sensor in the drying system is not reading correctly