Error Code LC
Water is leaking inside the base of the dishwasher
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LC
What This Means
Water leaking from hose connections; Sump and tub assembly leaking; Drain pump assembly leaking; Door seal damaged; Leakage sensor defective; Main PBA defect
What actually causes this:
A hose connection came loose or a seal is worn out, letting water drip into the bottom pan
First Thing to Check
Turn off the dishwasher and water supply immediately — check under the dishwasher for water on the floor
Parts Involved
How to Fix
- 1
1. Check whether there is any trace of water leakage in the shutter/base pan
- 2
2. Inspect all hose connections for leaks
- 3
3. Check sump assembly for cracks or damage
- 4
4. Check drain pump seals
- 5
5. If leak found, check the leakage location and replace the faulty part
- 6
6. If no leak found (normal condition), replace the Main PBA
Other Error Codes for DW80K5050UW
The dishwasher's control boards can't talk to each other
The dishwasher can't drain the water out
Too much water detected inside the dishwasher
The main control board and the motor controller can't communicate
Water is slowly leaking into the dishwasher when it shouldn't be
The dishwasher isn't getting enough water
The water temperature sensor isn't reading correctly
The incoming water is too hot for safe operation