Dishwashers: No heat
Parts frequently associated with this issue and repair guidance from service manuals.
Parts commonly needed for this issue
Based on repair data across Samsung and LG dishwasher models. These parts are frequently associated with this problem — they may not be the cause of your specific issue.
Motor Run Box
OEM: 2504-000009
Verified across 2 retailers
Hose
OEM: DD61-00518B
Verified across 2 retailers
Door Switch
OEM: DD97-00256A
Verified across 2 retailers
Repair tips for this issue
From manufacturer service manuals.
From the service manual
Good to know
6 technician insights for the this appliance
Always drain residual water before any service
Before replacing any parts: (1) Drain water by operating the drain pump, (2) Close the water supply valve, (3) Turn off the power and disconnect the power cable — you must turn off the circuit breaker connected to the product, (4) Pull out the unit from the sink and lay it on the floor — be careful of the drain hose when pulling out.
Main PBA hangs on hooks — lift carefully when removing
When removing the Main PBA, lift the board up carefully because it is hanging on the PBA case by two hooks. If you pull without lifting first, you can crack the board or break the hooks.
PBA version codes use BCD format with four LEDs
Both Main PBA and Sub PBA version codes are displayed in BCD (binary-coded decimal) format using four LEDs: Auto=8, Normal=4, Heavy=2, Express=1. For example, Auto+Heavy+Express LEDs on = code B (8+2+1=11). The code and software version alternate display at 1Hz.
Seeing an error code on your display? Find your model to look up the error code →
Browse by model
Know your model number? Get model-specific parts and diagnostic information.
Browse Dishwashers by model →