How do I fix error code tE2 on my LG DLE3600B?

1. undefined: Turn off the dryer and unplug from power. 2. undefined: Follow the same diagnostic steps as tE1. 3. undefined: Disconnect NA6 connector and short yellow and blue pins; if error clears check connector seating, if not replace main PCB. 4. undefined: Measure thermistor resistance and compare to Thermistor Table 1. 5. undefined: Replace thermistor if resistance is out of table range; otherwise check harness connectors for damage or loose pins.

LG DLE3600BDryer

Error Code tE2

Thermistor of blower housing - Outlet thermistor open or shorted

Moderate

Address soon - your appliance may not work properly

Also displayed as: tE2

How to Fix

1
Turn off the dryer and unplug from power.
2
Follow the same diagnostic steps as tE1.
3
Disconnect NA6 connector and short yellow and blue pins; if error clears check connector seating, if not replace main PCB.
4
Measure thermistor resistance and compare to Thermistor Table 1.
5
Replace thermistor if resistance is out of table range; otherwise check harness connectors for damage or loose pins.

Other Error Codes for DLE3600B

NFC module type is wrong

EE PROM (non-volatile memory) operation is abnormal

NFC module open or shorted

d95

Exhaust ductwork approximately 95%+ blocked - FlowSense alert

Water supply pump failure - pump AD value below 10 in test mode

d90

Exhaust ductwork approximately 90-95% blocked - FlowSense alert

tE4

Thermistor of steam generator - open or shorted

No power / power supply issue - electric dryer power cord not connected or house power supply incorrect

Need more help with your LG DLE3600B?