Error Code EE
EE PROM (non-volatile memory) operation is abnormal
Moderate
Address soon - your appliance may not work properly
Also displayed as: EE
How to Fix
- 1
Enter diagnostic test mode.
- 2
If EE is displayed, the main PCB EEPROM has failed.
- 3
Replace the main PCB assembly.
- 4
After replacement, verify all functions work correctly in diagnostic test mode.
Other Error Codes for DLG3601B
NFC module type is wrong
NFC module open or shorted
Exhaust ductwork approximately 95%+ blocked - FlowSense alert
Water supply pump failure - pump AD value below 10 in test mode
Exhaust ductwork approximately 90-95% blocked - FlowSense alert
Thermistor of steam generator - open or shorted
No power / power supply issue - electric dryer power cord not connected or house power supply incorrect
Steam water supply pump failure detected in test mode