Name: LG DLG7001W
Brand: LG

Question 1

What does error code d80 mean on LG DLG7001W?

Accepted Answer

Flow Sense restriction detected - ductwork restriction warning. Cause: Ductwork too long or has too many turns/restrictions; Lint buildup or debris in ductwork; Restriction detected in external venting.

Question 2

What does error code d90 mean on LG DLG7001W?

Accepted Answer

Ductwork approximately 90% blocked. Cause: Ductwork too long; Too many turns/restrictions; Significant blockage from lint buildup or debris; Appliance has detected restriction in external dryer venting.

Question 3

What does error code d95 mean on LG DLG7001W?

Accepted Answer

Ductwork approximately 95% blocked - severe restriction. Cause: House exhaust system blocked; Ductwork 90-95% blocked.

Question 4

What does error code E5 mean on LG DLG7001W?

Accepted Answer

Pump AD value too low - pump failure. Cause: Pump AD value below 10 during diagnostic test fourth press.

Question 5

What does error code gAS mean on LG DLG7001W?

Accepted Answer

Gas supply issue. Cause: Gas supply or service turned off.

Question 6

What does error code HS mean on LG DLG7001W?

Accepted Answer

Humidity sensor (moisture/electrode sensor) failure. Cause: Humidity sensor failure.

Question 7

What does error code nP mean on LG DLG7001W?

Accepted Answer

No power supply. Cause: Power cord not connected correctly; House power supply incorrect.

Question 8

What does error code PF mean on LG DLG7001W?

Accepted Answer

Power failure during cycle. Cause: House fuse blown; Circuit breaker tripped; Power outage.

Question 9

What does error code PS mean on LG DLG7001W?

Accepted Answer

Power supply problem - no power to controller. Cause: Electric dryer power cord not connected correctly; House power supply incorrect; House fuse blown; Circuit breaker tripped; Power outage.

Question 10

What does error code tE1 mean on LG DLG7001W?

Accepted Answer

Temperature sensor (thermistor) failure. Cause: Temperature sensor open or shorted; Thermistor disconnected from NA6 connector.

DLG7001W

Error Codes

On this page

Warranty

LG Support

Track your LG

Code	Meaning	Severity
d80	Flow Sense restriction detected - ductwork restriction warning	Moderate
d90	Ductwork approximately 90% blocked	Moderate
d95	Ductwork approximately 95% blocked - severe restriction	Moderate
E5	Pump AD value too low - pump failure	Moderate
gAS	Gas supply issue	Moderate
HS	Humidity sensor (moisture/electrode sensor) failure	Moderate
nP	No power supply	Moderate
PF	Power failure during cycle	Moderate