Name: LG DLG7301WE
Brand: LG

Question 1

What does error code d80 mean on LG DLG7301WE?

Accepted Answer

FlowSense - ductwork restriction detected (shown after drying cycle ends, remains 2 hours). Cause: Ductwork too long or too many turns/restrictions; Significant blockage due to lint buildup; Restriction in external dryer venting.

Question 2

What does error code d90 mean on LG DLG7301WE?

Accepted Answer

FlowSense - ductwork 90-95% blocked (displayed 2 hours only). Cause: Ductwork approximately 90-95% blocked; House exhaust system blocked.

Question 3

What does error code d95 mean on LG DLG7301WE?

Accepted Answer

FlowSense - ductwork 95%+ blocked (displayed 2 hours only). Cause: Ductwork severely restricted; House exhaust system blocked.

Question 4

What does error code E5 mean on LG DLG7301WE?

Accepted Answer

Pump (AD value) below threshold in diagnostic test mode (4th press). Cause: AD value of pump lower than 10 on display.

Question 5

What does error code FOUR_BARS_FLOWSENSE mean on LG DLG7301WE?

Accepted Answer

FlowSense installation test - exhaust system severely restricted. Cause: Severely restricted exhaust system; Crushed or kinked duct; Too many elbows; Lint blockage.

Question 6

What does error code gAS mean on LG DLG7301WE?

Accepted Answer

Gas supply issue (Gas model only). Cause: Gas supply turned off; Service valve closed.

Question 7

What does error code HS mean on LG DLG7301WE?

Accepted Answer

Humidity (moisture) sensor failure. Cause: Electrode moisture sensor failure; Harness to sensor disconnected.

Question 8

What does error code nP mean on LG DLG7301WE?

Accepted Answer

No power / power not detected. Cause: Power cord not connected correctly; House fuse blown; Circuit breaker tripped.

Question 9

What does error code PF mean on LG DLG7301WE?

Accepted Answer

Power failure during cycle. Cause: Power cord not connected correctly; House fuse blown; Power outage.

Question 10

What does error code PS mean on LG DLG7301WE?

Accepted Answer

Power supply issue - incorrect voltage or no power. Cause: Electric dryer power cord not connected correctly; House power supply incorrect; House fuse blown or circuit breaker tripped; Power outage.

DLG7301WE

What's wrong with your appliance?

Error Codes

On this page

Warranty

LG Support

Track your LG

Code	Meaning	Severity
d80	FlowSense - ductwork restriction detected (shown after drying cycle ends, remains 2 hours)	Moderate
d90	FlowSense - ductwork 90-95% blocked (displayed 2 hours only)	Moderate
d95	FlowSense - ductwork 95%+ blocked (displayed 2 hours only)	Moderate
E5	Pump (AD value) below threshold in diagnostic test mode (4th press)	Moderate
FOUR_BARS_FLOWSENSE	FlowSense installation test - exhaust system severely restricted	Moderate
gAS	Gas supply issue (Gas model only)	Moderate
HS	Humidity (moisture) sensor failure	Moderate
nP	No power / power not detected	Moderate