Error Code HS
Humidity sensor failure
Moderate
Address soon - your appliance may not work properly
Also displayed as: HS
What This Means
Humidity (moisture) sensor electrode bars dirty or coated with fabric softener residue; Harness connection to sensor bars loose or corroded; NA6 connector pin 2 (Orange) or pin 4 (Blue) open; Main PCB failure
Other Error Codes for DLG7401BE
Duct blockage warning - ductwork approximately 90% blocked
Temperature sensor (thermistor) failure - shorted circuit
No power supply to controller
Temperature sensor (thermistor) failure - open circuit
Gas supply error - gas not supplied to dryer (Gas model only)
Power failure / power supply interruption
Flow Sense duct restriction indicator - moderate blockage detected after cycle
Power supply error - low voltage or incorrect wiring (Electric only)