LG DLGX4001WDryer
Error Code HS
Humidity sensor failure
Moderate
Address soon - your appliance may not work properly
Also displayed as: HS
How to Fix
- 1
Turn off the dryer and call for service.
- 2
Check moisture sensor bar connections in the lint filter housing.
- 3
Verify resistance between NA6 pin 3 (GN) and chassis ground screw is <1Ω.
- 4
Check wiring harness between PCB and sensor bars.
Other Error Codes for DLGX4001W
d80
Ductwork approximately 80% blocked — flow sense restriction warning
d95
Ductwork approximately 95% blocked — critical flow sense restriction
nC
NFC module open or shorted
bI9
Big load indicator for steam cycle load size selection (not a fault code)
dE
Door switch abnormal
tE4
Thermistor of steam generator open or shorted
PF
Power failure — circuit breaker tripped or power outage occurred
nP
No power / power cord not connected correctly