Error Code PF
Power failure — circuit breaker tripped or power outage occurred
Moderate
Address soon - your appliance may not work properly
Also displayed as: PF
How to Fix
- 1
Reset circuit breaker or replace fuse. Do not increase fuse capacity.
- 2
If circuit overload: have corrected by a qualified electrician.
- 3
Verify power cord connection to terminal block.
- 4
Refer to Connecting Electric Dryers section for complete instructions.
Other Error Codes for DLGX4001W
Ductwork approximately 80% blocked — flow sense restriction warning
Ductwork approximately 95% blocked — critical flow sense restriction
NFC module open or shorted
Big load indicator for steam cycle load size selection (not a fault code)
Humidity sensor failure
Door switch abnormal
Thermistor of steam generator open or shorted
No power / power cord not connected correctly