Error Code tE2
Thermistor of blower housing — outlet thermistor open or shorted
Moderate
Address soon - your appliance may not work properly
Also displayed as: tE2
How to Fix
- 1
Same diagnostic procedure as tE1.
- 2
Disconnect harness from thermistor assembly connector.
- 3
Measure resistance and compare to temperature-resistance table.
- 4
Replace thermistor if out of range.
- 5
Replace controller if thermistor is in range and connector checks pass.
Other Error Codes for DLGX4201B
Ductwork approximately 80% blocked — flow sense restriction warning
Ductwork approximately 95% blocked — critical flow sense restriction
NFC module open or shorted
Big load indicator for steam cycle load size selection (not a fault code)
Humidity sensor failure
Door switch abnormal
Thermistor of steam generator open or shorted
Power failure — circuit breaker tripped or power outage occurred