Name: Samsung DV22N6850HX
Brand: Samsung

Question 1

What does error code 3C mean on Samsung DV22N6850HX?

Accepted Answer

The dryer motor isn't spinning properly. Cause: Possible causes include issues with BLDC motor connector terminals or contacts, missing or damaged motor power cables/connectors on the inverter PBA, overloading due to excessive laundry (3C1), motor damage, problems with motor belt connections, or an inverter PBA fault..

Question 2

What does error code 3CA mean on Samsung DV22N6850HX?

Accepted Answer

The heat pump compressor motor isn't working. Cause: Potential causes include issues with the compressor motor connector terminal, malfunctioning of the compressor inverter PBA, damage to the compressor motor itself, or an overload condition..

Question 3

What does error code 5C mean on Samsung DV22N6850HX?

Accepted Answer

The water collection tank is full or the drain is blocked. Cause: Possible causes include a clogged drain hose, malfunctioning float sensor or water sensor, and drain pump failure or malfunction..

Question 4

What does error code 9C1 mean on Samsung DV22N6850HX?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Possible causes include an under-voltage or over-voltage condition at the power supply, use of a plug receptacle leading to voltage drop, connecting wire length causing a momentary drop (e.g., 1m can reduce up to 10V), or a fault in the main PBA..

Question 5

What does error code 9CA1 mean on Samsung DV22N6850HX?

Accepted Answer

The compressor is getting incorrect voltage. Cause: Possible causes include an under-voltage or over-voltage condition at the power supply, voltage drop due to using a plug receptacle, or occasionally a fault in the main PBA..

Question 6

What does error code AC mean on Samsung DV22N6850HX?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Potential causes include faulty wiring between PBAs, loose or disconnected wire terminals among them, failure in the main PBA communication circuit, or issues with the display PBA communication circuit..

Question 7

What does error code AC4 mean on Samsung DV22N6850HX?

Accepted Answer

Your dryer's WiFi connection isn't working. Cause: Possible causes include faulty soldering on the WiFi module, communication failure between the WiFi PBA and main PBA, or a failure in the main PBA's WiFi circuit. Additionally, entering line test mode after completing the dry procedure could be responsible..

Question 8

What does error code AC6 mean on Samsung DV22N6850HX?

Accepted Answer

The drum motor controller isn't communicating properly. Cause: Possible causes include incorrect or disconnected wire connections between the main and inverter PBAs, a fault in the main PBA communication circuit, or a fault in the inverter PBA communication circuit..

Question 9

What does error code ACA mean on Samsung DV22N6850HX?

Accepted Answer

The compressor controller isn't communicating properly. Cause: Possible causes include incorrect wire connections between the main and compressor inverter PBAs, disconnected wires between these components, or faults in either the main PBA communication circuit or the Compressor Inverter PBA communication circuit..

Question 10

What does error code bC2 mean on Samsung DV22N6850HX?

Accepted Answer

A button on the control panel is stuck or shorted. Cause: Potential causes include a short in the display PCB key circuit, a button on the control panel that is stuck or jammed, moisture or debris causing false contact on the control panel, or a malfunction of the display PCB..

DV22N6850HX

Error codes

How to diagnose

Code	Meaning	Severity
3C	The dryer motor isn't spinning properly	Critical
3CA	The heat pump compressor motor isn't working	Critical
5C	The water collection tank is full or the drain is blocked	Moderate
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
9CA1	The compressor is getting incorrect voltage	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
AC4	Your dryer's WiFi connection isn't working	Moderate
AC6	The drum motor controller isn't communicating properly	Critical