Name: Samsung DV25B6900EW
Brand: Samsung

Question 1

What does error code 9C1 mean on Samsung DV25B6900EW?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Power cord not connected properly; Electrical outlet not working properly; Voltage out of range at the outlet; Faulty main PCB.

Question 2

What does error code AC mean on Samsung DV25B6900EW?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PBA (main control board); Faulty SUB PBA (display board); Damaged or loose wire harness between Main PBA and SUB PBA.

Question 3

What does error code C1 mean on Samsung DV25B6900EW?

Accepted Answer

The vent blockage test found a problem with your exhaust. Cause: Items left inside the drum during Smart Install; Dry sensor (moisture sensor) malfunction; Moisture sensor wiring issue.

Question 4

What does error code C8/C80 mean on Samsung DV25B6900EW?

Accepted Answer

Your dryer vent is about 80% blocked. Cause: Lint accumulation in the duct system; Partially crushed or kinked exhaust duct; Too many bends in the duct run.

Question 5

What does error code C9/C90 mean on Samsung DV25B6900EW?

Accepted Answer

Your dryer vent is over 90% blocked — needs immediate cleaning. Cause: Severe lint accumulation in the duct system; Fully blocked exhaust duct or hood; Crushed or severely kinked exhaust duct.

Question 6

What does error code Ct mean on Samsung DV25B6900EW?

Accepted Answer

Your dryer detected restricted airflow during a vent test. Cause: Ambient temperature too extreme for accurate vent test; Dryer was recently operated (still hot inside); Thermistor issue causing incorrect temperature reading.

Question 7

What does error code dF mean on Samsung DV25B6900EW?

Accepted Answer

The door switch isn't working properly. Cause: Loose wire terminals in door sense circuit; Open wire terminals in door sense circuit; Defective door switch giving invalid readings.

Question 8

What does error code FC mean on Samsung DV25B6900EW?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Non-standard power source frequency (not 60Hz); Generator or inverter power supply with unstable frequency; Power frequency sense circuit fault on main PCB.

Question 9

What does error code HC mean on Samsung DV25B6900EW?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Clogged lint filter restricting airflow; Restricted vent system causing heat buildup; Thermistor resistance out of range; Thermostat failure; Heater malfunction.

Question 10

What does error code tC mean on Samsung DV25B6900EW?

Accepted Answer

Your dryer's temperature sensor isn't reading correctly. Cause: Clogged lint screen restricting airflow; Restricted vent system causing abnormal temperature readings; Thermistor1 resistance out of range (open or shorted).

DV25B6900EW

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
C1	The vent blockage test found a problem with your exhaust	Moderate
C8/C80	Your dryer vent is about 80% blocked	Moderate
C9/C90	Your dryer vent is over 90% blocked — needs immediate cleaning	Critical
Ct	Your dryer detected restricted airflow during a vent test	Moderate
dF	The door switch isn't working properly	Moderate
FC	Your dryer is getting the wrong type of electrical power	Moderate