Error Code EEE
The dryer's memory chip has a communication error
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: EEE
What This Means
EEPROM chip failure on the PCB; PCB EEPROM circuit malfunction; Corrupted EEPROM data
What actually causes this:
A power surge or electrical glitch corrupted the dryer's internal memory.
First Thing to Check
Unplug the dryer for 5 minutes, then plug it back in — this may clear the error.
Parts Involved
How to Fix
- 1
1. Power cycle the dryer (unplug for 60 seconds, then reconnect)
- 2
2. If error persists, inspect the PCB for visible damage near the EEPROM circuit
- 3
3. Replace the PCB with EEPROM circuit
Other Error Codes for DV45K6500GV
The dryer thinks the door is open while running
A button on the control panel is stuck or shorted
The door switch isn't working properly
Your dryer is getting the wrong type of electrical power
The dryer's internal parts aren't communicating properly
Your dryer's temperature sensor isn't reading correctly
Your dryer is getting the wrong voltage from the outlet
Your dryer isn't heating properly or is overheating