Door or lid won't open
Parts commonly needed when your Samsung dryer has this issue. Recommendations are based on repair patterns and may not diagnose your specific problem.
Verified Components
Parts
3Part numbers confirmed across multiple retailers for DV50K7500G
Parts shown are based on similar models in this series — verify compatibility before ordering
Repair tips for this issue
From the service manual for Samsung DV50K7500E Series Dryers (2024)
From the service manual
Good to know
3 technician insights for the Samsung DV50K7500E Series Dryers (2024)
Door reversal is possible — use the pre-fixing black screw
The door can be reversed to open from the opposite side. A black screw is used for pre-fixing the door to the Frame Front — it must be moved to the other hole during reversal. Key steps: remove 2 door hinge screws, 2 Frame Front screws, 2 screws from opposite side, move holder lever, reassemble black screw in other hole, then reattach door. The complete procedure involves 12 steps.
Door reversal procedure uses a pre-fixing black screw
When reversing the door, there is a specific black screw that pre-fixes the door to the frame front. This screw must be removed from one hole and reassembled in the other hole on the opposite side. Missing this step during door reversal can result in the door not seating properly or the door falling during use.
Door switch insert direction matters during reassembly
When reassembling the door switch to the Frame Front, the insert direction is critical. Installing the door switch in the wrong orientation will cause it to malfunction and may trigger dE or dF error codes. The manual specifically warns to be careful of insert direction.
Seeing an error code on your display? Look up your error code → for more specific diagnostic information.