Takes too long to dry
Parts commonly needed when your Samsung dryer has this issue. Recommendations are based on repair patterns and may not diagnose your specific problem.
Verified Components
Parts
1Part numbers confirmed across multiple retailers for DV56H9100EW
Repair tips for this issue
From the service manual for Samsung DV56H9 Series Dryers (2018)
From the service manual
Good to know
2 technician insights for the Samsung DV56H9 Series Dryers (2018)
Restricted vent system — the #1 cause of heating errors
A restricted exhaust vent system is the most common root cause of overheating errors (tE, hE). Before replacing any heating components (thermistor, thermostat, heater), always check the vent system first. Common restrictions include: too-long duct runs, too many elbows, flex ductwork, outside hood damper stuck closed, or lint accumulation in the duct.
Three thermostats in this model — not just two
Unlike smaller Samsung dryers that have two thermostats, this 9.5 cu ft model has three thermostats (Thermostat 1, 2, and 3). Thermostat 1 is the 85C/25A thermal cut-off (high-limit). All three should read < 1Ohm when good and infinity when failed. Make sure to test all three during a no-heat diagnosis.
Seeing an error code on your display? Look up your error code → for more specific diagnostic information.