Error Code HC
Your dryer isn't heating properly or is overheating
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: HC
What This Means
Restricted vent system causing excessive heat buildup; Thermistor resistance out of range; Heater malfunction; Thermostat failure; Motor not running properly
What actually causes this:
Most often caused by a clogged exhaust vent that traps hot air inside the dryer, or the heating element has burned out.
First Thing to Check
Check your exhaust vent — disconnect it from the back of the dryer and look for lint buildup inside.
Parts Involved
How to Fix
- 1
1. Check exhaust vent system for restrictions or blockages
- 2
2. Measure thermistor resistance
- 3
3. Check thermostat resistance: should be < 1 ohm (infinity means replace)
- 4
4. Check heater resistance
- 5
5. For gas models: check igniter and gas valve operation
- 6
6. If resistance is infinity on heater, replace heater assembly
Other Error Codes for DVE46B6500
Your dryer detected restricted airflow during a vent test
The dryer thinks the door is open while running
Your dryer vent is over 90% blocked — needs immediate cleaning
Your dryer vent is about 80% blocked
The vent blockage test found a problem with your exhaust
Your dryer vent test passed — airflow is good
A button on the control panel is stuck or shorted
Your dryer vent is over 90% blocked — needs immediate cleaning