Error Code 9C1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C1
What This Means
Not using regular power source (voltage out of range); Low voltage from utility; Faulty outlet or wiring; Electrical outlet not working properly; Power supply not being supplied properly; Voltage sense circuit fault on PCB
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Check the PCB and wire harness
- 2
2. Check if the electrical outlet is working properly
- 3
3. Check if power is supplied properly
- 4
4. Measure voltage at the outlet: should be 120V/240V for electric, 120V for gas
- 5
5. Check for blown fuse or tripped circuit breaker
- 6
6. If voltage is correct, inspect voltage sense circuit on main PCB
Other Error Codes for DVE52A5500W
Your dryer vent is clogged and needs cleaning
The door switch isn't working properly
The dryer's internal parts aren't communicating properly
Your dryer's temperature sensor isn't reading correctly
A button on the control panel is stuck or shorted
Your dryer isn't heating properly or is overheating
Your dryer is getting the wrong type of electrical power
The dryer motor isn't spinning properly