Error Code 9E1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9E1
What This Means
Invalid or abnormal power supply voltage; Faulty PCB voltage sense circuit; Damaged wire harness
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Check PCB and wire harness for damage
- 2
2. Measure voltage at the outlet: should be 120V/240V for electric, 120V for gas
- 3
3. Check for blown fuse or tripped circuit breaker
- 4
4. Check power supply stability
- 5
5. If voltage is correct, inspect PCB
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for DVE55M9600W
The dryer thinks the door is open while running
The dryer's internal parts aren't communicating properly
The dryer's memory chip has a communication error
A button on the control panel is stuck or shorted
The door switch isn't working properly
Your dryer's temperature sensor isn't reading correctly
Your dryer is getting the wrong type of electrical power
Your dryer isn't heating properly or is overheating