Name: Samsung DVG41A3000W
Brand: Samsung

Question 1

What does error code 3C mean on Samsung DVG41A3000W?

Accepted Answer

The dryer motor isn't spinning properly. Cause: Shorted motor relay on PCB; Defective main PCB; Motor winding issue causing relay overload.

Question 2

What does error code 9C1 mean on Samsung DVG41A3000W?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Abnormal voltage at outlet; Low or high voltage from utility; Faulty outlet or wiring; Voltage sense circuit fault on PCB.

Question 3

What does error code AC mean on Samsung DVG41A3000W?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PBA (main control board); Faulty SUB PBA (display board); Damaged or loose wire harness between Main PBA and SUB PBA.

Question 4

What does error code bC2 mean on Samsung DVG41A3000W?

Accepted Answer

A button on the control panel is stuck or shorted. Cause: Display PCB key circuit shorted; Display PCB malfunction; Stuck or shorted button on control panel; Moisture or debris on control panel causing short.

Question 5

What does error code C1 mean on Samsung DVG41A3000W?

Accepted Answer

The vent blockage test found a problem with your exhaust. Cause: Items left inside the drum during Vent Blockage Test; Dry sensor malfunction; Dirty moisture sensor bars.

Question 6

What does error code C80 mean on Samsung DVG41A3000W?

Accepted Answer

Your dryer vent is about 80% blocked. Cause: Significant lint buildup in exhaust ductwork; Partially crushed vent hose; Partially blocked exhaust hood.

Question 7

What does error code C90 mean on Samsung DVG41A3000W?

Accepted Answer

Your dryer vent is over 90% blocked — needs immediate cleaning. Cause: Severe lint buildup in exhaust ductwork; Nearly fully blocked vent or exhaust hood; Severely crushed or kinked vent hose.

Question 8

What does error code Clg mean on Samsung DVG41A3000W?

Accepted Answer

Your dryer vent is clogged and needs cleaning. Cause: Lint buildup in exhaust ductwork; Crushed or kinked vent hose; External exhaust hood damper stuck closed; Excessively long duct run or too many elbows.

Question 9

What does error code Ct mean on Samsung DVG41A3000W?

Accepted Answer

Your dryer detected restricted airflow during a vent test. Cause: Dryer was recently used and internal temperature is too high; Dryer is in a very cold environment (below 32 degrees F); Ambient temperature is outside the testable range.

Question 10

What does error code dC mean on Samsung DVG41A3000W?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Loose wire terminals in door sense circuit; Defective door switch.

DVG41A3000W

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
3C	The dryer motor isn't spinning properly	Critical
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
bC2	A button on the control panel is stuck or shorted	Moderate
C1	The vent blockage test found a problem with your exhaust	Moderate
C80	Your dryer vent is about 80% blocked	Moderate
C90	Your dryer vent is over 90% blocked — needs immediate cleaning	Critical
Clg	Your dryer vent is clogged and needs cleaning	Moderate