Error Code 9C1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C1
What This Means
Power source voltage out of range; Low voltage from utility; Faulty outlet or wiring; Voltage sense circuit fault on PCB
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Measure voltage at the outlet: should be 120V/240V for electric or 120V for gas
- 2
2. Check for blown fuse or tripped circuit breaker
- 3
3. Verify dryer is on a dedicated circuit
- 4
4. If voltage is correct, inspect voltage sense circuit on main PCB
Other Error Codes for DVG45R6300
Your dryer detected restricted airflow during a vent test
The dryer thinks the door is open while running
Your dryer vent is over 90% blocked — needs immediate cleaning
Your dryer vent is about 80% blocked
The vent blockage test found a problem with your exhaust
Your dryer vent test passed — airflow is good
A button on the control panel is stuck or shorted
Your dryer vent is over 90% blocked — needs immediate cleaning