Name: Samsung DVG45T3200
Brand: Samsung

Question 1

What does error code 3C mean on Samsung DVG45T3200?

Accepted Answer

The dryer motor isn't spinning properly. Cause: Motor relay shorted on main PCB; Motor winding fault; Motor locked or seized.

Question 2

What does error code 9C1 mean on Samsung DVG45T3200?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Not using regular power source (voltage out of range); Low voltage from utility; Faulty outlet or wiring; PCB voltage sense circuit fault; Wire harness damage.

Question 3

What does error code AC mean on Samsung DVG45T3200?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PCB; Faulty Display/Sub PCB; Damaged or loose wire harness between Main PCB and Display PCB.

Question 4

What does error code bC2 mean on Samsung DVG45T3200?

Accepted Answer

A button on the control panel is stuck or shorted. Cause: Display PCB loose connection; Display PCB shorted; Stuck or jammed button on control panel; Moisture or debris on control panel causing short.

Question 5

What does error code C1 mean on Samsung DVG45T3200?

Accepted Answer

The vent blockage test found a problem with your exhaust. Cause: Clothes or other items left inside the drum during the test; Moisture sensor malfunction; Moisture sensor bars dirty or corroded.

Question 6

What does error code C80 mean on Samsung DVG45T3200?

Accepted Answer

Your dryer vent is about 80% blocked. Cause: Significant lint buildup in exhaust duct; Partially blocked exhaust hood; Restricted duct run.

Question 7

What does error code C90 mean on Samsung DVG45T3200?

Accepted Answer

Your dryer vent is over 90% blocked — needs immediate cleaning. Cause: Severe lint buildup in exhaust duct; Completely blocked or collapsed exhaust duct; External exhaust hood completely obstructed.

Question 8

What does error code Clg mean on Samsung DVG45T3200?

Accepted Answer

Your dryer vent is clogged and needs cleaning. Cause: Lint buildup in exhaust duct; Crushed or kinked exhaust duct; External exhaust hood damper stuck closed; Excessive duct length or too many elbows.

Question 9

What does error code Ct mean on Samsung DVG45T3200?

Accepted Answer

Your dryer detected restricted airflow during a vent test. Cause: Dryer is too cold (below 32 degrees F / 0 degrees C); Dryer is too hot (above 104 degrees F / 40 degrees C); Dryer was recently used and has not cooled down sufficiently.

Question 10

What does error code dC mean on Samsung DVG45T3200?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Door sensor unit loose or disconnected; Door sensor unit shorted.

DVG45T3200

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
3C	The dryer motor isn't spinning properly	Critical
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
bC2	A button on the control panel is stuck or shorted	Moderate
C1	The vent blockage test found a problem with your exhaust	Info
C80	Your dryer vent is about 80% blocked	Moderate
C90	Your dryer vent is over 90% blocked — needs immediate cleaning	Critical
Clg	Your dryer vent is clogged and needs cleaning	Moderate