Name: Samsung DVG50B5100V
Brand: Samsung

Question 1

What does error code 9C1 mean on Samsung DVG50B5100V?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Improper power supply voltage; Faulty PCB or wire harness; Low voltage from utility; Loose terminal block connections.

Question 2

What does error code AC mean on Samsung DVG50B5100V?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PBA (main control board); Faulty SUB PBA (display board); Damaged or loose wire harness between Main PBA and SUB PBA.

Question 3

What does error code C1 mean on Samsung DVG50B5100V?

Accepted Answer

The vent blockage test found a problem with your exhaust. Cause: Items left inside the drum during vent test; Dry sensor (moisture sensor) malfunction; Moisture sensor bars dirty or disconnected.

Question 4

What does error code C8 mean on Samsung DVG50B5100V?

Accepted Answer

Your dryer vent is about 80% blocked. Cause: Exhaust duct heavily obstructed with lint; Exhaust duct too long or with too many elbows; Outside exhaust hood damper partially stuck.

Question 5

What does error code C9 mean on Samsung DVG50B5100V?

Accepted Answer

Your dryer vent is over 90% blocked — needs immediate cleaning. Cause: Exhaust duct severely obstructed with lint or debris; Exhaust duct crushed or kinked; Outside exhaust hood damper fully stuck closed.

Question 6

What does error code Ct mean on Samsung DVG50B5100V?

Accepted Answer

Your dryer detected restricted airflow during a vent test. Cause: Dryer was recently running and is still hot; Ambient temperature too low for accurate test; Dryer was just moved from cold environment.

Question 7

What does error code dC mean on Samsung DVG50B5100V?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Door sensor unit is loose; Door sensor unit is shorted; Defective door switch.

Question 8

What does error code dF mean on Samsung DVG50B5100V?

Accepted Answer

The door switch isn't working properly. Cause: Door sensor unit is loose; Door sensor unit is shorted; Defective door switch giving invalid readings.

Question 9

What does error code FC mean on Samsung DVG50B5100V?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Not using regular power source frequency (not 60Hz); Generator or inverter power supply with unstable frequency; Power frequency sensor circuit malfunction on PCB.

Question 10

What does error code HC mean on Samsung DVG50B5100V?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Restricted vent system causing excessive heat buildup; Thermistor malfunction; Heater malfunction; PCB malfunction.

DVG50B5100V

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
C1	The vent blockage test found a problem with your exhaust	Moderate
C8	Your dryer vent is about 80% blocked	Moderate
C9	Your dryer vent is over 90% blocked — needs immediate cleaning	Critical
Ct	Your dryer detected restricted airflow during a vent test	Info
dC	The dryer thinks the door is open while running	Moderate
dF	The door switch isn't working properly	Moderate