Name: Samsung DVG55A7300E
Brand: Samsung

Question 1

What does error code 3C mean on Samsung DVG55A7300E?

Accepted Answer

The dryer motor isn't spinning properly. Cause: PBA motor relay is shorted; Motor relay circuit failure on main PCB.

Question 2

What does error code 9C1 mean on Samsung DVG55A7300E?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Not using regular power source (voltage out of range); Low voltage from utility; Faulty outlet or wiring; Electrical outlet not working properly; Power supply not being supplied properly; Voltage sense circuit fault on PCB.

Question 3

What does error code AC mean on Samsung DVG55A7300E?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty Main PBA (main control board); Faulty SUB PBA (display board); Damaged or loose wire harness between Main PBA and SUB PBA.

Question 4

What does error code bC2 mean on Samsung DVG55A7300E?

Accepted Answer

A button on the control panel is stuck or shorted. Cause: Display PCB key circuit is loose; Display PCB key circuit is shorted; Display PCB malfunction; Stuck or shorted button on control panel.

Question 5

What does error code CLg mean on Samsung DVG55A7300E?

Accepted Answer

Your dryer vent is clogged and needs cleaning. Cause: Lint accumulation in exhaust duct; Exhaust duct too long or with too many elbows; Outside exhaust hood damper stuck closed; Flex ductwork reducing airflow; Lint filter clogged.

Question 6

What does error code dC mean on Samsung DVG55A7300E?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Door sensor unit is loose; Door sensor unit is shorted; Defective door switch.

Question 7

What does error code dF mean on Samsung DVG55A7300E?

Accepted Answer

The door switch isn't working properly. Cause: Door sensor unit is loose; Door sensor unit is shorted; Defective door switch giving invalid readings.

Question 8

What does error code FC mean on Samsung DVG55A7300E?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Not using regular power source frequency (not 60Hz); Invalid power frequency sensor circuit on PCB; Generator or inverter power supply with unstable frequency.

Question 9

What does error code HC mean on Samsung DVG55A7300E?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Restricted vent system causing excessive heat buildup; Thermistor resistance out of range; Heater malfunction; Thermostat failure; PCB fault.

Question 10

What does error code tC mean on Samsung DVG55A7300E?

Accepted Answer

Your dryer's temperature sensor isn't reading correctly. Cause: Clogged lint screen restricting airflow and causing abnormal temperature readings; Restricted vent system causing heat buildup; Thermistor resistance out of range (open or shorted).

DVG55A7300E

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
3C	The dryer motor isn't spinning properly	Critical
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
bC2	A button on the control panel is stuck or shorted	Moderate
CLg	Your dryer vent is clogged and needs cleaning	Moderate
dC	The dryer thinks the door is open while running	Moderate
dF	The door switch isn't working properly	Moderate
FC	Your dryer is getting the wrong type of electrical power	Moderate