How do I fix error code tE2 on a LG dryers?

1. undefined: Same diagnostic procedure as tE1. 2. undefined: Disconnect harness from thermistor assembly connector. 3. undefined: Measure resistance and compare to temperature-resistance table. 4. undefined: Replace thermistor if out of range. 5. undefined: Replace controller if thermistor is in range and connector checks pass.

LG Dryers2020–present

Error Code tE2

Thermistor of blower housing — outlet thermistor open or shorted

Moderate

Address soon - your appliance may not work properly

Also displayed as: tE2

How to Fix

1
Same diagnostic procedure as tE1.
2
Disconnect harness from thermistor assembly connector.
3
Measure resistance and compare to temperature-resistance table.
4
Replace thermistor if out of range.
5
Replace controller if thermistor is in range and connector checks pass.

This Error Applies To

LG DLEX4200W Series Dryers (2020) (2020–present)

Service manual exact match: DLEX4200WService manual exact match: DLEX4200BService manual exact match: DLGX4201VService manual exact match: DLEX4000WService manual exact match: DLEX4000BService manual exact match: DLEX4200VService manual exact match: DLGX4201WService manual exact match: DLGX4201B+2 more

Related Error Codes

d80

Ductwork approximately 80% blocked — flow sense restriction warning

NFC module open or shorted

bI9

Big load indicator for steam cycle load size selection (not a fault code)

tE4

Thermistor of steam generator open or shorted

EEPROM error — EE PROM operation is abnormal

NFC module wrong

gAS

Gas supply or service turned off

Humidity sensor failure

Need more help with your LG dryers?