Error Code bIS

Steam generator not filled within 60 seconds — water level not detected

Also displayed as: bIS

How to Fix

1. 1

   Check if steam feeder drawer has sufficient water — fill to MAX line.

2. 2

   Verify steam feeder drawer is fully seated and drawer is completely closed.

3. 3

   Turn dryer off, then restart the steam cycle.

4. 4

   Do not use distilled water; the water level sensor requires mineral content to function.

5. 5

   If feeder is full and error persists: check pump wiring connections.

6. 6

   If pump harness is intact: replace the water supply pump.

7. 7

   If steam generator itself does not fill after pump replacement: replace steam generator assembly.

This Error Applies To

LG DLEX4270V Series Dryers