Error Code Add

Steam feeder water supply error — steam generator not filled within 60 seconds

Also displayed as: Add

How to Fix

1. 1

   1. Check steam feeder drawer: Make sure steam feeder is filled with water to MAX line.

2. 2

   2. Make sure steam feeder is seated properly and drawer is fully closed.

3. 3

   3. Turn the dryer off then restart the steam cycle.

4. 4

   4. Do not use distilled water — the water level sensor in steam generator will not work with distilled water.

5. 5

   5. If pump not working → Unplug dryer and call for service.

6. 6

   6. If Add displays during drying cycle but water is at MAX → Pump not working; replace pump.

7. 7

   7. Check CN7 connector wiring for pump (pins 1-2).

This Error Applies To

LG DLEX8900V Series Dryers