Error Code E It

Ice Maker Kit Defect — Ice Maker Motor Malfunction

What This Means

Malfunction of in-door ice maker motor; Loose wiring harness to ice maker motor

How to Fix

1. 1

   Step 1: Enter test mode by pressing Ice Plus + Freezer buttons simultaneously for 3 seconds.

2. 2

   Step 2: Check ice maker motor for working sound and visual operation.

3. 3

   Step 3: Measure sub PCB resistance at CON1 pins (U-V, V-W, W-U) — expected 2.37 to 2.73 ohm each.

4. 4

   Step 4: Check sub PCB voltage at CON1 pin 34-33 — expected 21.6 to 26.4V.

5. 5

   Step 5: If motor resistance is out of range, replace ice maker assembly (Dispenser Assembly Ice).

6. 6

   Step 6: If voltage at main PCB side is correct but sub PCB voltage is wrong, harness open circuit is suspected — inspect and repair harness.

7. 7

   Step 7: If all values are correct but error persists, replace the Case Assembly PCB (Sub PCB, Loc. 612A).

8. 8

   Step 8: If main PCB voltage is wrong, replace Main PCB (Loc. 500A).

This Error Applies To

LG LRFOC2606 Series Refrigerators (2023) (2023–present)