Error Code E FS
Freezer Sensor Error — short or open circuit in the freezer thermistor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E FS
How to Fix
- 1
Check for loose or disconnected connector between Main PCB and freezer sensor at CON4 pins 18~17.
- 2
If connector is loose or disconnected, reconnect or repair the connector.
- 3
Measure sensor resistance at CON4 pins 18~17. If resistance is 0 ohm (short), replace the sensor.
- 4
If resistance is infinite/open, proceed to check sensor connection harness.
- 5
If sensor connection is normal and resistance is open, replace sensor.
- 6
Check the temperature-to-resistance table. If resistance does not match expected value for the measured temperature, replace the sensor.
- 7
If all checks pass and resistance is normal, explain normal operation to customer.
- 8
If sensor connection is faulty, reconnect or repair connector. If PCB is suspect after all checks pass, replace the refrigerator main PCB.
This Error Applies To
LG LRMVS3006D Series Refrigerators (2020) (2020–present)
Related Error Codes
Refrigerator Sensor Error — short or open circuit in the fresh food compartment thermistor
Freezer Defrost Sensor Error — short or open circuit in the freezer defrost sensor
Refrigerator Defrost Sensor Error — short or open circuit in the refrigerator defrost sensor
Humidity Sensor Error — short or open circuit in the humidity sensor
Convertible (Pantry/Full Convert) Sensor Error — short or open circuit in the pantry drawer sensor
Room Temperature Sensor Error — short or open circuit in the ambient room temperature sensor
Icing Sensor Error — short or open circuit in the icing compartment (in-door icemaker) sensor
In-door Icemaker Kit Error — electrical system error (motor, gear, Hall IC, operation circuit) within in-door icemaker