Error Code Ed5
ezDispense System Error - automatic detergent injection pump connector fault
Moderate
Address soon - your appliance may not work properly
What This Means
Automatic detergent injection pump connector missing or poor contact at Sub PCB Wh6 (1pin, 3pin)
How to Fix
- 1
Confirm Ed5 ERROR is displayed
- 2
Check automatic detergent injection pump connector at Sub PCB Wh6 (1pin, 3pin)
- 3
If connector missing or poor contact: reconnect the connector
- 4
If connector OK: replace Sub PCB
This Error Applies To
LG WM6700H Series Washers (2022) (2022–present)
Related Error Codes
Pressure Sensor Error - water level sensor malfunction
Door Open Error - door not properly closed or locked
Unbalance Error - load is not evenly distributed in drum
Too much detergent causing excessive suds
ezDispense Softener Pump Error - softener injection pump failure
ezDispense Detergent Dispense Sensor Error
ezDispense Softener Dispense Sensor Error
Inlet Valve Error - water supply problem detected