Error Code IE
Inlet Error — water not filling properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: IE
What This Means
Water tap is off or supply is not on; Inlet valve filter clogged with foreign material; Connector of valve and RD6 on PCBA disconnected or faulty; Inlet valve resistance out of range (should be 20-30 ohms); PCBA fault
How to Fix
- 1
Step 1: Verify water tap is open and water supply is on. If no — turn the tap on.
- 2
Step 2: Check filter on inlet valve for clogging with foreign material. If clogged — clean or replace the filter.
- 3
Step 3: Check connector of inlet valve and RD6 on PCBA. If disconnected — reconnect or repair the connector.
- 4
Step 4: Enter test mode (Testmode 3) and check inlet valve operation. If PCBA fault — replace the PCBA.
- 5
Step 5: Check inlet valve resistance (should be 20-30 ohms). If out of range — replace the inlet valve assembly.
This Error Applies To
LG WT7405CW Series Washers (2018) (2018–present)
Related Error Codes
Foreign Object in Wash Plate — object caught between wash plate and inner basket
Overflow Error — water level too high
Unbalance Error — load is unbalanced during spin
Door Error — lid/door not detected as closed and locked
Door Lock Error — lid failed to lock
Locked Motor Error — motor stalled or failed to rotate
Drain Error — water not draining within expected time
Pressure Sensor Error — water level sensor fault