Error Code dL
Door Lock Error — lid lock mechanism not completing lock cycle
Moderate
Address soon - your appliance may not work properly
What This Means
Doorlock switch trying to lock but failing; Lid out of balance / not level
How to Fix
- 1
1. Confirm dL is displayed.
- 2
2. Check the doorlock switch to see if it is attempting to lock. If it is trying but failing, replace the doorlock switch.
- 3
3. If it is not trying to lock at all, replace the PCBA.
- 4
4. Check that the lid is balanced / properly aligned. Replace the door or reset the balance as needed.
This Error Applies To
LG WT7800CW Series Washers (2019) (2019–present)
Related Error Codes
Thermistor / Temperature Sensor Error — thermistor open or short circuit (heater models only)
Pressure Sensor Error — water level sensor malfunction
Locked Motor Error 1 — foreign object caught between wash plate and inner basket
Drain Error — water not draining within expected time
Door (Lid) Open Error — lid not detected as closed/locked at cycle start
Locked Motor Error — motor locked or hall sensor fault
Unbalance Error — load is unevenly distributed during spin
Water Overflow Error — water level too high