Error Code FC2
The fan that blows hot air to dry your dishes is not spinning properly
Minor
Usually easy to fix - may resolve on its own
Also displayed as: FC2
What This Means
Drying Fan Motor failure; Drying Fan Impeller clogged by foreign matter; Fan motor connector disconnected
What actually causes this:
Something is blocking the drying fan or the fan motor has worn out
First Thing to Check
If dishes are not drying well, this fan may be the cause — service is likely needed
Parts Involved
How to Fix
- 1
1. Check the connection of the connector — reconnect
- 2
2. Check the DC voltage of Main PBA — refer to Main PBA DC Check
- 3
3. Check if the Impeller is fixed/stuck — if stuck, unlock the Impeller
- 4
4. Check the resistance of the Fan Motor coil (remove connector before measuring) — Normal: approx. 150 ohms
- 5
5. If impeller is clear and resistance is normal, replace the Drying Fan Motor
This Error Applies To
Samsung DW80B7070A Series Dishwashers (2023) (2023–present)
Related Error Codes
The dishwasher is not getting enough water to run
The dishwasher cannot pump the dirty water out
The heating element is not warming the water properly
The water inside the dishwasher got dangerously hot
The hot air drying system is not heating up properly
The hot air drying system got dangerously overheated
The water temperature sensor is not reading correctly
The temperature sensor in the drying system is not reading correctly