Error Code bC2
A control panel button appears to be stuck
Minor
Usually easy to fix - may resolve on its own
Also displayed as: bC2 (no display during operation)
What This Means
Touch button is out of order; An object is sitting on the touch button; Condensation on control panel connector; Sub PBA defective
What actually causes this:
Moisture from steam got into the control panel, or something is resting on the buttons
First Thing to Check
Remove anything that might be pressing against the buttons and wipe down the control panel to remove any moisture
Parts Involved
How to Fix
- 1
1. Check whether there is an object on the touch buttons causing a false press
- 2
2. Check whether there is condensation on the Main PBA connector — normal means no condensation
- 3
3. If condensation found, remove all moisture and dry thoroughly
- 4
4. If no condensation, replace the control panel assembly (Sub PBA)
This Error Applies To
Samsung DW80K5050U Series Dishwashers (2020) (2020–present)
Related Error Codes
The dishwasher's control boards can't talk to each other
The dishwasher isn't getting enough water
The dishwasher can't drain the water out
The water temperature sensor isn't reading correctly
The incoming water is too hot for safe operation
The heating element isn't warming the water
Water is leaking inside the base of the dishwasher
Too much water detected inside the dishwasher