Error Code FC
Your dryer is getting the wrong type of electrical power
Moderate
Address soon - your appliance may not work properly
Also displayed as: FC
What This Means
Not using regular power source frequency (not 60Hz); Power frequency sensor circuit fault on PCB; Generator or inverter power supply with unstable frequency
What actually causes this:
The power supply frequency is outside the expected range — usually a generator or unstable power issue.
First Thing to Check
If you're running the dryer on a generator, try plugging it into a regular wall outlet instead.
Parts Involved
How to Fix
- 1
1. Verify the power source is providing standard 60Hz frequency
- 2
2. Check if dryer is connected to a generator or inverter — these may not provide stable 60Hz
- 3
3. Inspect the power frequency sensor circuit on the PCB
- 4
4. Test with known good 60Hz power source
This Error Applies To
Samsung DV40J3000E Series Dryers (2014) (2014–present)
Related Error Codes
The door switch isn't working properly
A button on the control panel is stuck or shorted
Your dryer isn't heating properly or is overheating
Your dryer's temperature sensor isn't reading correctly
The dryer's internal parts aren't communicating properly
The dryer thinks the door is open while running
Your dryer is getting the wrong voltage from the outlet
The second temperature sensor is reading incorrectly