Error Code AC
The dryer's internal parts aren't communicating properly
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: AC
What This Means
Faulty Main PCB; Faulty Display PCB (SUB PBA); Damaged or loose wire harness between Main PCB and Display PCB
What actually causes this:
A loose wire connection between the control board and display, or a power surge scrambled the electronics.
First Thing to Check
Unplug the dryer for 2 minutes, then plug it back in — this resets the electronics.
Parts Involved
How to Fix
- 1
1. First check the PCB and wire harness connections
- 2
2. Inspect wire harness between Main PBA and SUB PBA for pinched, cut, or corroded wires
- 3
3. If wiring is intact, replace the PCB
- 4
4. If the problem persists after PCB replacement, replace the other PCB
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DV45T3400 Series Dryers (2020) (2020–present)
Related Error Codes
The dryer thinks the door is open while running
Your dryer is getting the wrong type of electrical power
Your dryer is getting the wrong voltage from the outlet
Your dryer isn't heating properly or is overheating
Your dryer's temperature sensor isn't reading correctly
A secondary temperature sensor is giving bad readings
The door switch isn't working properly
The dryer motor isn't spinning properly