Error Code HC
Your dryer isn't heating properly or is overheating
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: HC
What This Means
Restricted vent system causing excessive heat buildup; Thermistor malfunction; Heater malfunction; PCB malfunction
What actually causes this:
Most often caused by a clogged exhaust vent that traps hot air inside the dryer, or the heating element has burned out.
First Thing to Check
Check your exhaust vent — disconnect it from the back of the dryer and look for lint buildup inside.
Parts Involved
How to Fix
- 1
1. Check the PCB and thermistor
- 2
2. Check exhaust vent system for restrictions or blockages
- 3
3. Test the heater element for continuity
- 4
4. Replace faulty components as identified
This Error Applies To
Samsung DV50B5100 Series Dryers (2024) (2024–present)
Related Error Codes
The door switch isn't working properly
The dryer thinks the door is open while running
The dryer's internal parts aren't communicating properly
Your dryer detected restricted airflow during a vent test
Your dryer's temperature sensor isn't reading correctly
Your dryer is getting the wrong voltage from the outlet
Your dryer vent is over 90% blocked — needs immediate cleaning
Your dryer is getting the wrong type of electrical power