Error Code 3C
The dryer motor isn't spinning properly
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 3C
What This Means
Shorted motor relay on PCB; Defective main PCB; Motor winding issue causing relay overload
What actually causes this:
The drum belt may have broken or come off, something is jamming the drum, or the motor itself has failed.
First Thing to Check
Open the door and try to spin the drum by hand — it should rotate freely with slight resistance.
Parts Involved
How to Fix
- 1
1. Check the PCB Motor Relay for short circuit
- 2
2. Inspect motor winding resistance: Pin 3-4 should be 2.99 ohm, Pin 4-5 should be 4 ohm
- 3
3. If motor windings are within spec, replace the main PCB
- 4
4. If motor windings are out of spec, replace the motor
This Error Applies To
Samsung DVE41A3000 Series Dryers (2020) (2020–present)
Related Error Codes
Your dryer is getting the wrong type of electrical power
A button on the control panel is stuck or shorted
Your dryer isn't heating properly or is overheating
The door switch isn't working properly
Your dryer vent is about 80% blocked
The dryer thinks the door is open while running
Your dryer is getting the wrong voltage from the outlet
The dryer's internal parts aren't communicating properly