Error Code 9C1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C1
What This Means
Power source voltage out of range; Low voltage from utility; Faulty outlet or wiring; Voltage sense circuit fault on PCB
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Measure voltage at the outlet: should be 120V/240V for electric or 120V for gas
- 2
2. Check for blown fuse or tripped circuit breaker
- 3
3. Verify dryer is on a dedicated circuit
- 4
4. If voltage is correct, inspect voltage sense circuit on main PCB
This Error Applies To
Samsung DVE45R6300 Series Dryers (2024) (2024–present)
Related Error Codes
The dryer thinks the door is open while running
Your dryer detected restricted airflow during a vent test
The dryer's internal parts aren't communicating properly
Your dryer vent is over 90% blocked — needs immediate cleaning
Your dryer vent is about 80% blocked
Your dryer vent test passed — airflow is good
The vent blockage test found a problem with your exhaust
A button on the control panel is stuck or shorted