Error Code CLg
Your dryer vent is clogged and needs cleaning
Moderate
Address soon - your appliance may not work properly
Also displayed as: CLg
What This Means
Lint buildup in exhaust duct; Crushed or kinked vent hose; Outside exhaust hood blocked or stuck closed; Vent run too long or too many elbows; Lint filter severely clogged
What actually causes this:
Lint has built up inside the exhaust vent over time, restricting airflow and making your dryer work harder.
First Thing to Check
Pull the dryer away from the wall and disconnect the exhaust vent hose — check for packed lint inside.
Parts Involved
How to Fix
- 1
1. Clean the lint filter
- 2
2. Check your vent condition (refer to ducting requirements section)
- 3
3. Inspect the full length of exhaust duct for lint buildup or restrictions
- 4
4. Check outside exhaust hood opens and closes freely
- 5
5. Contact expert personnel for thorough cleaning if needed
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DVE50R8500 Series Dryers (2024) (2024–present)
Related Error Codes
A button on the control panel is stuck or shorted
Your dryer is getting the wrong type of electrical power
The dryer motor isn't spinning properly
Your dryer is getting the wrong voltage from the outlet
The dryer's internal parts aren't communicating properly
A secondary temperature sensor is giving bad readings
The door switch isn't working properly
Your dryer's temperature sensor isn't reading correctly