Error Code AC
The dryer's internal parts aren't communicating properly
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: AC
What This Means
Faulty Main PCB; Faulty Display PCB; Damaged or loose wire harness between Main PCB and Display PCB
What actually causes this:
A loose wire connection between the control board and display, or a power surge scrambled the electronics.
First Thing to Check
Unplug the dryer for 2 minutes, then plug it back in — this resets the electronics.
Parts Involved
How to Fix
- 1
1. First check the PCB and wire harness for loose or damaged connections
- 2
2. Inspect wire harness for pinched, cut, or corroded wires between the boards
- 3
3. If wiring is intact, replace the PCB
- 4
4. If the problem persists after replacing one PCB, replace the other PCB
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung DVE54R7600 Series Dryers
Related Error Codes
Your dryer's temperature sensor isn't reading correctly
Your dryer vent is clogged and needs cleaning
The door switch isn't working properly
A button on the control panel is stuck or shorted
Your dryer is getting the wrong voltage from the outlet
A secondary temperature sensor is giving bad readings
The dryer's internal parts aren't communicating properly
The dryer thinks the door is open while running