Samsung Ovens & Ranges
Error Code C-F2
Main to Touch communication error
Moderate
Address soon - your appliance may not work properly
What This Means
Touch film tail not fully connected; Faulty Assy Display Module; Faulty Assy Control Box
How to Fix
- 1
Check if touch film tail is connected fully; reconnect if loose
- 2
Replace Assy Display Module
- 3
Replace Assy Control Box
This Error Applies To
Samsung DOP30T840 Series Ovens & Ranges
Service manual exact match: DOP30T840GS/DAService manual exact match: DOP30T840GS/**Service manual exact match: DOP30T840**
Related Error Codes
C-d1
Door locking malfunction
C-24
Oven vent blocked
C-F0
Communication error: Main to Sub module or Sub to LCD communication failure
C-A2
Ambient temperature of Sub PCB too hot: cooling fan failure
C-20
Oven sensor open (resistance over 2950 ohms) or shorted (resistance under 930 ohms)
C-d0
Key short: touch panel key held down for more than 30 seconds triggers IC reset
C-21
Oven heating over-temperature