Error Code C-D1
Door lock mechanism is not responding to lock/unlock commands
Moderate
Address soon - your appliance may not work properly
Also displayed as: C-D1
What This Means
Disconnected harness from door lock switch or motor; Faulty door lock motor; Faulty door lock switch; Damaged door lock relay
What actually causes this:
Loose wiring, failed lock motor, or defective locking solenoid
First Thing to Check
Check all harness connections are properly seated to lock motor and switch
Parts Involved
How to Fix
- 1
Disconnect power and check harness connections to door lock switch and motor
- 2
Measure door lock motor resistance (should be 1750-1850 ohm at room temperature)
- 3
Check micro switch operation (com-NC should be closed when door is unlocked)
- 4
Measure voltage at lock motor connector during operation (should be 120V AC)
- 5
Check wall main PCB CN203 connector for proper connection
This Error Applies To
Samsung DOP36M86DL Series Ovens & Ranges (2017) (2017–present)
Related Error Codes
PCB internal temperature sensor is open circuit
Steam temperature sensor is open or short circuit
Touch screen panel is not communicating with main control board
Touch control panel or keypad is not responding properly
Meat temperature probe has short circuit or is not functioning
PCB internal temperature sensor is short circuit or PCB is overheating
Water not draining from steam system within expected time
Main control board cannot communicate with sub board due to disconnection