Error Code C-32
PCB temperature rises abnormally high
Moderate
Address soon - your appliance may not work properly
What This Means
Cooling fan relay failure; PCB thermal runaway
How to Fix
- 1
Disconnect power
- 2
Measure sensor resistance — spec approximately 1100 ohms at room temperature
- 3
Check connecting condition of harness — Oven sensor and connector CN on Main PCB
- 4
Measure resistance of connector CN at Main PCB (open or short under spec indicates PCB damage)
- 5
Ensure no patterns, soldering, or parts related to oven sensor are damaged on Main PCB
- 6
Repair or replace Main PCB accordingly
- 7
Replace oven sensor if needed
- 8
Reconnect or repair damaged harness as required
This Error Applies To
Samsung NE Series Ovens & Ranges
Related Error Codes
Oven sensor is open when the oven is operating
Communication between Main PCB and Touch PCB is interrupted
Internal temperature rises abnormally high — safety error
Communication between Main PCB and Sub PCB is interrupted
Key short circuit — keypad short detected on Sub PCB
PCB temp sensor is short when oven is operating
Door lock is mispositioned — door lock motor or switch fault during self-clean
PCB temp sensor is open when oven is operating