Samsung Ovens & Ranges
Error Code C-30
Main PCB sensor is open when oven is operating or sensor short
Moderate
Address soon - your appliance may not work properly
What This Means
Main PCB temperature sensor failure; Sensor circuit disconnection or short
How to Fix
- 1
Disconnect power
- 2
Check PCB sensor circuit for open or short condition
- 3
Inspect connector CNS300 on Main PCB
- 4
Replace Main PCB if sensor circuit is faulty
This Error Applies To
Samsung NE63A6511 Series Ovens & Ranges
Service manual exact match: NE63A6511SService manual exact match: NE63A6511
Related Error Codes
C-21
Oven heating over - internal temperature rises abnormally high
C-d1
Door lock is misaligned or malfunctioning
C-d0
Short in the control key
C-31
Main PCB temperature rises abnormally high
C-20
Oven sensor opened (over 2950 ohms) or Oven sensor shorted (under 930 ohms)
C-F2
Main to Touch communication is interrupted
bAd LinE
Power connection is installed improperly