Error Code C0
Top sensor open circuit (cooktop)
Moderate
Address soon - your appliance may not work properly
What This Means
Sensor disconnected; Sensor wire damaged; Sensor failure; Connector housing not fully inserted
How to Fix
- 1
Check sensor connection at PCB
- 2
Check sensor wire for damage and reconnect
- 3
Verify sensor housing is fully inserted in PCB connector
- 4
Measure sensor resistance for open circuit condition
- 5
Replace sensor if defective
- 6
Replace MAIN PCB if electrical connections are normal
This Error Applies To
Samsung NE63T8951 Series Ovens & Ranges
Related Error Codes
Main PCB sensor open circuit
Power cord installed improperly
Sub PCB temperature abnormally high
Key short - knob continuously pushing/jamming
Over temperature on cooktop burner
DC motor locking or jamming
Temperature probe sensor short circuit
Oven heating over - abnormal temperature rise