Samsung Ovens & Ranges2024–present
Error Code SWE
Cooktop sensor malfunction
Moderate
Address soon - your appliance may not work properly
Also displayed as: SWE
What This Means
Sensor wire damaged or disconnected; Sensor housing not inserted properly in PCB connector; Defective temperature sensor on cooktop
What actually causes this:
Broken wire, loose connector, or failed induction sensor
First Thing to Check
Check cooktop sensor wire connection at each burner position
Parts Involved
Cooktop temperature sensorCooktop harnessControl PCB connector
How to Fix
- 1
Check if sensor wire is damaged
- 2
Verify sensor housing is properly inserted into PCB connector
- 3
Measure sensor real resistance (open or short circuit)
- 4
If no problem found after checks, perform operation again
This Error Applies To
Samsung NEHWS Series Ovens & Ranges (2024) (2024–present)
Service manual exact match: NEW-WSService manual exact match: NE-HWSService manual exact match: NE-WS