What does error code C-F2 mean on a Samsung ovens & ranges?

Communication interrupted between Main and Touch PCB Sub PCB connector not inserted; Touch PCB disconnected; Control PCB failure

How do I fix error code C-F2 on a Samsung ovens & ranges?

1. undefined: Check whether connector of Sub PCB has been inserted 2. undefined: If no issue with Sub PCB connector, replace Sub PCB 3. undefined: If problem persists after replacing Sub PCB, replace control PCB

Samsung Ovens & Ranges

Error Code C-F2

Communication interrupted between Main and Touch PCB

Moderate

Address soon - your appliance may not work properly

What This Means

Sub PCB connector not inserted; Touch PCB disconnected; Control PCB failure

How to Fix

1
Check whether connector of Sub PCB has been inserted
2
If no issue with Sub PCB connector, replace Sub PCB
3
If problem persists after replacing Sub PCB, replace control PCB

This Error Applies To

Samsung NV51K7770D Series Ovens & Ranges

Service manual exact match: NV51M9970DService manual exact match: NV51M9770DService manual exact match: NV51K7770DG

Related Error Codes

-dC-

Partition inserted or removed while oven is operating

C-F0

Communication interrupted between Main and Sub PCB

C-20

Oven sensor open circuit when operating

C-21

Internal temperature rises abnormally high - Oven sensor short circuit or thermal runaway

C-23

Temp probe sensor is shorted when oven is operating

C-30

PCB temp sensor is open when oven is operating

C-31

PCB temperature rises abnormally high

C-70

Steam sensor open when steam mode is on

Need more help with your Samsung ovens & ranges?