How do I fix error code E-27 on a Samsung ovens & ranges?

1. undefined: Disconnect electrical power to range 2. undefined: Remove upper rear cover panel 3. undefined: Measure sensor resistance (normal: 1080 Ohms at room temperature) 4. undefined: Check for damaged terminals or wires on harness 5. undefined: Disconnect sensor connector from PCB and check resistance (normal: 2850 Ohms) 6. undefined: Replace faulty oven temperature sensor

Samsung Ovens & Ranges

Error Code E-27

Q: What does error code E-27 mean on a Samsung ovens & ranges?

Oven Sensor Opened (Over 2950 Ohms) Defective oven temperature sensor; Damaged terminal on harness; Broken wire on harness

Oven Sensor Opened (Over 2950 Ohms)

Moderate

Address soon - your appliance may not work properly

What This Means

Defective oven temperature sensor; Damaged terminal on harness; Broken wire on harness

How to Fix

1
Disconnect electrical power to range
2
Remove upper rear cover panel
3
Measure sensor resistance (normal: 1080 Ohms at room temperature)
4
Check for damaged terminals or wires on harness
5
Disconnect sensor connector from PCB and check resistance (normal: 2850 Ohms)
6
Replace faulty oven temperature sensor

This Error Applies To

Samsung NX583G0VBS Series Ovens & Ranges

Service manual exact match: NX583G0VBSRService manual exact match: NX58R4311SGService manual exact match: NX58F5300SSService manual exact match: NX58R4311SSService manual exact match: NX58F5500SWService manual exact match: NX58F5500SSService manual exact match: NX58F5500SB

Related Error Codes

E-28

Oven Sensor Shorted (Under 930 Ohms)

E-0E

Door Locking Error - Door lock in wrong position after 1 minute

-SE-

Shorted Key - Keypad is pressed for 10 minutes

E-08

Oven temperature rises too slowly - fails to reach 125F (52C) within 10 minutes at room temperature

E-0A

Oven Overheating Error - Temperature does not reach 650F (343C) in any cooking function except Self Clean

Need more help with your Samsung ovens & ranges?